FFKM
Perfluoroelastomers (FFKM)
Perfluoroelastomers(FFKM) contain fully fluorinated polymer chains and hence offer the ultimate performance of elastomers when considering heat and chemical resistance. Excellent resistance to fuels, all types of lubricating oils and greases, mineral-based and hydraulic fluids,solvents, alcohols, most acids and alkalis.
Cure system
Peroxide-cured vs. Nitrile-cured
Standard FFKM are usually peroxide-cured. FFKM compounds with nitrile-cured have better heat resistance than the peroxide cured.
Other Common Variations
- FFKM has excellent resistance to high temperature, oil, solvent, flame,chemical and weather, and it is usually applied in semiconductor, chemical processing, aerospace and many industrials.
- FFKM can also be used in the oil and gas industry with highly aggressive media, high pressure, and in extreme temperature. They are resistant against rapid gas decompression as well.
General Information
ASTM D 1418 Designation
FFKM
Standard Color(s)
Black
ISO/DIN 1629 Designation
FFKM
ТВЕРДОСТЬ
60-95 Shore A
ASTM D2000 / SAE J 200 Codes
KK
Relative Cost
Expensive
ТЕМПЕРАТУРА ОБСЛУЖИВАНИЯ
Standard Low Temperature
0°C / 32°F
Special Compound Low Temperature
-30°C / -22°F
Standard High Temperature
250°C / 482°F
Special Compound High Temperature
315°C / 599°F
Performs Well In...
- Hydrocarbons
- Alkalis
- Amines
- Lubricants
- Ketones/Esters/Ethers
- Ozone, weather and very high temperature air
- Acid (Organic and inorganic acids)
- Water/Steam
- Sour gas
- Aldehydes
- High vacuum
Doesn’t Perform Well In...
- Fluorinated fluid